top of page
GAS FILTER-COALESCERS
PEACH technology, depth style gas filter-coalescer for use in PECO PEACH Gemini PuraSep generation 1 Series PGCPH vessels. Used to provide ultra-clean gas with high efficiency removal of solid and liquid contaminants down to 0.3 microns. Available in various performance levels: PL-01, PL-20, PL-23.
PEACH technology, depth style gas filter-coalescer for use in PECO PEACH Gemini PuraSep generation 2 Series GEM2 vessels. Used to provide ultra-clean gas with high efficiency removal of solid and liquid contaminants down to 0.3 microns. Available in various performance levels: PL-01, PL-20, PL-23.
GAS COALESCERS
PEACH technology, depth style gas coalescers for use in PECO Series 77V vertical gas coalescer vessels or competitor vessels of similar design. Highly efficient removal of aerosol mist down to the 0.3 micron level. Available in various performance levels: PL-01, PL-20, PL-23.
GAS FILTER-SEPARATORS
PEACH technology, depth style gas filter-separator cartridges for use in PECO Series 75HTL and 75VTL Titan PuraSep® gas vessels. Available in the following micron ratings: 0.1, 0.3, 0.5, 1, 5, 10.
PEACH technology, depth style gas filter-separator cartridges for use in PECO Series 75H and 75V gas vessels or competitor vessels of similar design. Available in the following micron ratings: 0.1, 0.3, 0.5, 1, 5, 10.
GAS PARTICULATE FILTERS
Pleated style gas filter-separator cartridges for use in PECO Series 70HTL and 70VTL Titan PuraSep® dry gas vessels. Available in the following micron ratings: 0.5, 1, 5, 10, 20, 50.
Pleated style gas filter-separator cartridges for use in PECO Series 70H and 70V gas vessels or competitor vessels of similar design. Available in the following micron ratings: 0.5, 1, 5, 10, 20, 50.
Pleated style dry gas filter cartridges for use in PECO Series 30F gas vessels. Available in the following micron ratings: 1, 2, 5, 10, 20.

PEACH technology, depth style dry gas filter cartridges for use in PECO Series 30F gas vessels. Available in the following micron ratings: 0.3, 1, 10.
Pleated style dry gas filter cartridges for use in PECO Series 30 gas vessels or competitors vessels of similar design. Available in the following micron ratings: 2, 5, 10, 20.

PEACH technology, depth style dry gas filter cartridges for use in PECO Series 30 gas vessels or competitors vessels of similar design. Available in the following micron ratings: 0.3, 1, 10.
LIQUID PARTICULATE FILTERS - LARGE DIAMETER
Cartridges designed for high flow rates in 6"OD and 40", 60" or 80" lengths and used in PECO Series 55HX and 55VX liquid vessels or competitors vessels of similar design. Several styles to handle any temperature, compatibility and cleanliness. Available in a wide range of medias and micron ratings.

Pleated or PEACH style cartridge options in 6"OD and 20" or 40" lengths for use in PECO Series 55C liquid vessels. Available in a large variety of medias from 1 to 100 micron rating options.

PEACH technology, depth style cartridges in 6"OD with various lengths and double open end cap design. Used in PECO Series 55 liquid vessels or competitor vessels of similar design. Available from 1 to 100 micron ratings options.

Pleated style cartridges made with synthetic or glass media in 6"OD with various lengths and double open end cap design. Used in PECO Series 55 liquid vessels or competitor vessels of similar design. Available from 2 to 70 micron rating options.
Pleated style cartridges made with cellulose media in 6"OD with various lengths and double open end cap design. Used in PECO Series 55 liquid vessels or competitor vessels of similar design. Available from 0.5 to 60 micron rating options.
LIQUID PARTICULATE FILTERS - SMALL DIAMETER

PEACH technology, depth style cartridges in 2.5"OD and 3"OD with various lengths and a variety of end cap options. Used in PECO Series 55 liquid vessels or competitor vessels of similar design. Available from 1 to 150 micron ratings options.

Rolled depth style "sock" cartridges are available in a variety of materials with the most common being a cotton/excelsior blend. Used in PECO Series 55 liquid vessels or competitor vessels of similar design. Available from 2 to 100 micron rating options.

Stringwound depth style cartridges are offered in a variety of string materials and micron ratings. Used in PECO Series 55 liquid vessels or competitor vessels of similar design.

Pleated style cartridges made using polyester, polypropylene or glass media with synthetic hardware and a variety of end cap styles. Used in PECO Series 55 liquid vessels or competitor vessels of similar design. Available from 0.5 to 70 micron rating options.

Pleated style cartridges made using a composite synthetic and cellulose blend media with synthetic hardware and a variety of end cap styles. Used in PECO Series 55 liquid vessels or competitor vessels of similar design. Available from 5 to 70 micron ratings options.

Pleated style cartridges made using cellulose media with synthetic hardware and a variety of end cap styles. Used in PECO Series 55 liquid vessels or competitor vessels of similar design. Available from 2 to 50 micron rating options.

Pleated style cartridges made with cellulose media with steel hardware and a variety of end cap styles. Used in PECO Series 55 liquid vessels or competitor vessels of similar design. Available from 0.5 to 60 micron rating options.
LIQUID/LIQUID PHASE COALESCERS & SEPARATORS

High flow style, glass depth coalescers in 40" or 60" lengths for use in PECO Series 110HXP and 110HRXP vessels. Recommended for coalescing hydrocarbon droplets from water.

High flow style, glass depth coalescers with internal pleat pack in 40" or 60" lengths for use in PECO Series 110HXP and 110HRXP vessels. Recommended for coalescing hydrocarbon droplets from water. Internal pleat pack helps to capture solid particulate and keep the coalescing tube clean.
High flow style, PEACH depth coalescers in 40" or 60" lengths for use in PECO Series 110HXP and 110HRXP vessels. Recommended for coalescing hydrocarbon droplets from water.
High flow style, Hot/Chem PEACH depth coalescers in 40" or 60" lengths for use in PECO Series 110HXP and 110HRXP vessels. Recommended for coalescing hydrocarbon, amine and caustic droplets from quench water.

High flow style, pleated fluoropolymer coalescers in 40" or 60" lengths for use in PECO Series 110HXP and 110HRXP vessels. Recommended for low IFT applications below 15 dynes/cm.
Glass depth style coalescers for use in PECO Series 110H and 110V vessels or competitor vessels of similar design. Available in double open end or threaded base end cap styles. Recommended for coalescing hydrocarbon droplets from water.

High flow style, Hot/Chem PEACH depth coalescers in 40" or 60" lengths for use in PECO Series 110HXP and 110HRXP vessels. Recommended for coalescing hydrocarbon, amine and caustic droplets from quench water.
Glass depth style coalescers with internal pleat pack for use in PECO Series 110H and 110V vessels or competitor vessels of similar design. Available in double open end or threaded base end cap styles. Internal pleat pack helps to capture solid particulate and keep the coalescing tube clean.
Hot/Chem PEACH technology, depth coalescers for use in PECO Series 110H and 110HR vessels or competitor vessels of similar design. Available in double open end style and competitor retrofit style. Recommended for coalescing hydrocarbon, amine and caustic droplets from quench water.
Treated, pleated cellulose style separators for use in PECO Series 110H and 110V vessels or competitor vessels of similar design. Available in double open end style.
Synthetic hydrophobic screen style separators for use in PECO Series 110H and 110V vessels or competitor vessels of similar design. Available in double open end style competitor retrofit style. This design is cleanable and resuable.
Teflon coated screen style separators for use in PECO Series 110H and 110V vessels or competitor vessels of similar design. Available in double open end style competitor retrofit style. This design is cleanable and resuable.
LIQUID ADSORBERS
Activated carbon granules in canisters form to remove hydrocabons and degradation by-products in amine and glycol process streams. Used in PECO Series 10 vessels and competitor vessels of similar design. The most common size is 11"OD x 22"L and typically double stacked.
Loose activated carbon granules and non-activated support carbon for fixed beds to remove hydrocabons and degradation by-products in amine and glycol process streams. Used in PECO Series 10FB vessels and competitor vessels of similar design. 4x12 and 8x30 mesh sizes.
First stage PEACH media filters & captures solid particulate. This keeps the 2nd stage carbon block pores free from solid contaminants maximizing adsorption hydrocarbons, degradation by-products & aromatics. Used in PECO series 10 & 14 vessels along with competitor vessels that use carbon canisters.
vessels
Click here for Filter Cartridges
GAS FILTER-COALESCERS
Horizontal gas coalescer providing ultra-clean gas with high efficiency removal of solid and liquid contaminants down to 0.3 microns. It is designed to remove liquids such as lubricating oils, low surface tension liquids and aerosol mists. Made in 6" to 84" diameters with stock options available.
GAS COALESCERS
Vertical gas coalescer with highly efficient removal of aerosol mist down to the 0.3 micron level. Made in 6" to 60" diameters with stock options available.
Vertical gas coalescer used for smaller volume applications with a maximum liquid loading of 8 gallons per day. Liquid aerosol removal down to the 0.3 micron level. Stock units available from 6" to 10" diameter at 150# ANSI rating.
GAS FILTER-SEPARATORS
Vertical and horizontal quick change filter-separator for solid and liquid contaminant removal 1 micron and larger. Vessel contains a first stage filter cartridge followed by a second stage mist extraction device such as a wave plate or cyclotube. Made in 6" to 84" diameters.
Vertical gas filter-separator for use in smaller volume applications such as fuel gas conditioning filtration. Solids and liquid contaminant removal 1 micron and larger. Stock units available from 6" to 10" diameter at 150# ANSI rating.
GAS PARTICULATE FILTERS
Vertical and horizontal quick change gas filter for removal of dry, solid contaminants. Variety of micron rating filtration levels available. Made in 6" to 84" diameters.
In-line dry gas filter for gas distribution, regulator stations, instrument gas applications. Variety of micron rating filtration levels available. Made in cast steel design, units are available in 2", 3" and 4" flange connections at 150#, 300# and 600# ANSI ratings.
In-line dry gas filter for gas distribution, regulator stations, instrument gas applications. Variety of micron rating filtration levels available. Made in fabriacted steel design, units are available in 2" to 12" flange connections at 150#, 300# and 600# ANSI ratings.
GAS SEPARATORS & SCRUBBERS
Vertical and horizontal separators and scrubbers utilizing a vane mist extractor to remove liquid contaminants 8-10 microns and larger. Best for removing hydrocarbon liquids and water. Made in 12" to 120" diameters.
Vertical and horizontal separators and scrubbers utilizing a cyclotube mist extractor to remove liquid contaminants 3 -5 microns and larger. Best for removing crawling liquids and low surface tension liquids such as lube oil, glycol, paraffin, brine, asphaltenes. Made in 12" to 120" diameters.
LIQUID PARTICULATE FILTERS
Vertical and horizontal liquid filter for removal of solid contaminants. Provides high flow rate and high contaminant loading by utilizing large 6” diameter cartridges in 40", 60", 80" lengths. Variety of cartridge styles and micron rating filtration levels available. Made in 10" to 84" diameters.
Vertical and horizontal liquid filter for removal of solid contaminants. Uses traditional 2.5" and 3" diameter cartridges. Variety of cartridge styles and micron rating filtration levels available. Made in 6" to 72" diameters.
Liquid filter for removal of solid contaminants for flows up to 200 gpm. Comes in two sizes to hold a 20" or 40" length cartridge. Comes in 8” diameter and 150# ANSI rating. 2" NPT connections with option for 2" flange connections. Clamp saddles or legs allow for vertical or horizontal mounting.
LIQUID/LIQUID PHASE COALESCERS
Horizontal vessel for coalescing and separating two immiscible liquids with an inlet discontinuous phase up to 10% by volume. Uses high flow style tooless cartridge technology with an advanced new vessel design to optimize separation. Made in 10" to 84" diameters.
Vertical and horizontal vessel for coalescing and separating two immiscible liquids with an inlet discontinuous phase up to 5% by volume. Removes discontinuous phase down to 8 ppm(v) or less. Uses hydrophillic coalescer and hydrophobic separator cartridges. Made in 14" to 60" diameters.
Horizontal vessel for coalescing and separating two immiscible liquids. Density difference needs to be at least 20%. Uses mesh pad (wafer pack) to remove discontinuous phase. Removal performance excelsior or stainless steel 50-75 ppm(v) and glass 15-20 ppm(v). Made in 8” to 84” diameters.
CARBON ADSORBERS
Vertical vessel using quality, activated carbon in canisters to adsorb dissolved liquid impurities from process streams such as air, gas, water, amine and glycol. Helps prevent foaming, odor and hydrocarbon contaminant build-up. Made in 14" to 66" diameters.
Vertical vessel using a fixed bed of quality, activated carbon to adsorb dissolved liquid impurities from process streams such as air, gas, water, amine and glycol. Helps prevent foaming, odor and hydrocarbon contaminant build-up. Made in 24" to 140" diameters.
Vertical 2 stage Filter-Adsorber uses PEACH media to filter particulate & absorb hydrocarbons, followed by extruded carbon block to adsorb impurities from process streams (air, gas, water, amine & glycol). Helps prevent foaming, odor & hydrocarbon contaminant build-up. Made in 8" to 72" diameters.